|
If you install new pistons. Take your block down and get a fresh cross-hatch pattern honed in. Its really really cheap. Cost me $30. Only took off 0.0005 inch of clearance.
If you want to match weight your pistons. Which you should. Here's where to remove the weight. There is 0.01 grams difference between my pistons with the pins and rings installed.
Your crank is really shinny mgentz, though I am a bit disappointed in Falicon's efforts at lightening it. For what you payed they should have done more. I have been told I can basically get it down to the one in the photo I posted earlier.
|