October 10th, 2011, 12:02 PM
|
#6
|
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010
Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F
Posts: A lot.
|
Quote:
Originally Posted by gt_turbo
i do the same thing all the time. after getting the torque on the axle bolt, if the cotter pin wont go thru. i just tighten a little bit more to get the cotter pin in. haven't seen anything negative come from it.
|
Yeah I agree but her earlier statement to me is a concern and may be her biggest question.
Quote:
Originally Posted by reaperw
p.s why if i did not have the socket on the 17mm left side would the right side almost seem loose,but as soon as i put the 17mm back on and tryed to tq it it was tight
|
__________________________________________________
09 250R SE: Paying it forward one post at a time!
Don't forget to add yourself to our Member Map
|
|
|