ninjette.org - View Single Post - Where Might I find a Hose Diagram for a 2012 250R ???

Bob KellyIII · April 29th, 2023, 12:01 AM

after double checking I found the timing right on.... it's perfect.
so that has to mean carburetor
....
Gordon said he would take another look at them for free if I wanted to send them back to him.... so I did.... he did find too high of fuel level on the right side so he fixed that I told him I want 95 main jets and 2 needle shims under each needle....
and I have been instructed to not do anything to them just put them on and see if it runs correctly.... I mentioned that I will have to tune the fuel/air screws to get it to idle ( as I set them to factory specs after I first got it and it would not idle!)
but that is all I will do to them besides put them on the bike...
we'll see if he fixed them I guess !

...
Bob.....

April 29th, 2023, 12:01 AM	#8
Bob KellyIII Retired motorcycle Mc. Name: Robert Location: Weed, California. Join Date: Jul 2021 Motorcycle(s): 2012 Kawasaki Ninja 250R, 2021 CSC TT250, 1977 Triumph Bonneville 750cc,2001 Honda XR650L. Posts: A lot.	after double checking I found the timing right on.... it's perfect. so that has to mean carburetor .... Gordon said he would take another look at them for free if I wanted to send them back to him.... so I did.... he did find too high of fuel level on the right side so he fixed that I told him I want 95 main jets and 2 needle shims under each needle.... and I have been instructed to not do anything to them just put them on and see if it runs correctly.... I mentioned that I will have to tune the fuel/air screws to get it to idle ( as I set them to factory specs after I first got it and it would not idle!) but that is all I will do to them besides put them on the bike... we'll see if he fixed them I guess ! ... Bob..... __________________________________________________ Its too late when you've gone too far !