Quote:
Originally Posted by Timmy808
Someone tried to take my bike a few days ago and the messed up my ignition switch bad, my question is could I drill the ignition switch so I can take off the triple tree. Please any help would be appreciated
|
Hi Timmy, sucks what happened to your bike. I think process is other way around, you need to remove triple-T clamp first, then flip it over to drill out ignition switch. Here's a guide on how to remove ignition-switch:
https://faq.ninja250.org/wiki/How_to...gnition_switch
You can buy OEM replacement easily used or new. Will also work with your original key, just have to take both to locksmith to re-key it. Will also get the required anti-theft resistor built into the switch (aftermarket ones don't have it).
Good luck!