ninjette.org - View Single Post

cbzdel · January 2nd, 2013, 04:12 PM

Ok looking though the service manual, I read that if you unplug the valve it will throw a code but the engine will still run as normal, the ECU doesn't make any changes..

Then I read if I undid the air intake pressure sensor, it would throw a code and the ecu would go into damage control mode and still run but in a default mode..

So I would need to find a way to remove the valve and still allow the "air intake pressure sensor" to operate correctly..

January 2nd, 2013, 04:12 PM	#21
cbzdel ninjette.org member Name: Chris Location: Tacoma, WA Join Date: Sep 2012 Motorcycle(s): 2009 Ninja 250/2013 Ninja 300 Posts: 52	Ok looking though the service manual, I read that if you unplug the valve it will throw a code but the engine will still run as normal, the ECU doesn't make any changes.. Then I read if I undid the air intake pressure sensor, it would throw a code and the ecu would go into damage control mode and still run but in a default mode.. So I would need to find a way to remove the valve and still allow the "air intake pressure sensor" to operate correctly..