ninjette.org - View Single Post

jkv45 · June 8th, 2020, 11:23 AM

A 400 engine isn't going to just bolt right up I'm pretty sure. I thought there were major chassis and engine design changes that would make it impractical.

A used 300 engine should be a lot less than $900 at this point. We sold a low-mileage Ninja 250 engine (less carbs) in good condition for about $250 a couple years ago.

Normally a used engine is the best option.

June 8th, 2020, 11:23 AM	#2
jkv45 Rev Limiter Name: Jay Location: WI Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot. MOTM - Jun '18, Oct '16	A 400 engine isn't going to just bolt right up I'm pretty sure. I thought there were major chassis and engine design changes that would make it impractical. A used 300 engine should be a lot less than $900 at this point. We sold a low-mileage Ninja 250 engine (less carbs) in good condition for about $250 a couple years ago. Normally a used engine is the best option.
	1 out of 1 members found this post helpful.