ninjette.org - View Single Post - Handlebars and Front Wheel Out of Alignment

DannoXYZ · March 29th, 2019, 11:38 AM

Try jacking up front-end and loosening all following to undo any twisting from crash (you need to unclamp fork-blades from triple-T):

- front-wheel axle nut
- lower triple-T clamps
- upper triple-T clamps
- upper triple-T stem bolt

Place some wood blocks under front-tyre to keep fork from falling out. Remove fender and bracket, them being bent can cause fork to be cockeyed when loosened. Wiggle everything a litte to unbind any twists from crash. Centre front wheel and tighten everything back down in reverse order.

Measure fender & bracket for twisting (measure between diagonals). Bend back and re-install.

March 29th, 2019, 11:38 AM	#3
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Try jacking up front-end and loosening all following to undo any twisting from crash (you need to unclamp fork-blades from triple-T): - front-wheel axle nut - lower triple-T clamps - upper triple-T clamps - upper triple-T stem bolt Place some wood blocks under front-tyre to keep fork from falling out. Remove fender and bracket, them being bent can cause fork to be cockeyed when loosened. Wiggle everything a litte to unbind any twists from crash. Centre front wheel and tighten everything back down in reverse order. Measure fender & bracket for twisting (measure between diagonals). Bend back and re-install. Last futzed with by DannoXYZ; March 29th, 2019 at 12:42 PM.
	2 out of 2 members found this post helpful.