ninjette.org - View Single Post

Bob KellyIII · September 28th, 2021, 10:49 PM

Akima.....
you can still just cut 2 2"x4" short boards for each side of the front fork to get the front tire off the ground.... getting the bike ON those boards might be a struggle ( it would be for me) but I would use a screw jack under the engine
with wood blocks placed so you don't crush the plastic and just jack up the front.... I would get as far forward as I could with the jack though... and watch out it don't fall over doing this !
....
Bob...

September 28th, 2021, 10:49 PM	#103
Bob KellyIII Retired motorcycle Mc. Name: Robert Location: Weed, California. Join Date: Jul 2021 Motorcycle(s): 2012 Kawasaki Ninja 250R, 2021 CSC TT250, 1977 Triumph Bonneville 750cc,2001 Honda XR650L. Posts: A lot.	Akima..... you can still just cut 2 2"x4" short boards for each side of the front fork to get the front tire off the ground.... getting the bike ON those boards might be a struggle ( it would be for me) but I would use a screw jack under the engine with wood blocks placed so you don't crush the plastic and just jack up the front.... I would get as far forward as I could with the jack though... and watch out it don't fall over doing this ! .... Bob... __________________________________________________ Its too late when you've gone too far !