View Single Post
Old May 4th, 2022, 12:30 PM   #15
Bob KellyIII
Retired motorcycle Mc.
 
Bob KellyIII's Avatar
 
Name: Robert
Location: Weed, California.
Join Date: Jul 2021

Motorcycle(s): 2012 Kawasaki Ninja 250R, 2021 CSC TT250, 1977 Triumph Bonneville 750cc,2001 Honda XR650L.

Posts: A lot.
yah it seems to be fairly high quality .... I can get the spring off easily by just taking the preload nuts off and the spring falls off ... getting the shock out however is another story.... the top bolt is the hardest but I got it's number now ! HAHAHHA takes a #8 allen wrench on the head on the left side and a 17mm socket on the right to get the nut off but their a bitch to get in there, ya gott'a move the wiring harness over and it don't want to move much ! and it will take the socket off the extension if your not real carefull or ya don't hold your tongue right ! then you have to get the magnet and fish the socket out of the bowels if the machine because it won't hit the floor !
.....but it should be fairly straight forward .... I know what to expect this time !
HAHAHAHHAHAHA
We all know how that goes ! HA !
....
And THIS time I will grease everything ! ..... ( I'll remember right ? )
......

Bob......
__________________________________________________
Its too late when you've gone too far !
Bob KellyIII is offline   Reply With Quote