View Single Post
Old May 8th, 2022, 01:56 AM   #26
tfkrocks
ninjette.org certified postwhore
 
tfkrocks's Avatar
 
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009

Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold)

Posts: A lot.
MOTM - Jan '18, Sep '13
Quote:
Originally Posted by Ghostt View Post
Have to set the sag/preload on the bike? The rear shock is adjustable, what setting is it on? Did you test/inspect the shock itself when you had the spring out?

Check out the videos on how to set the sag, and what suspension is.

https://youtu.be/ZtzTyCKh5fY

https://youtu.be/uz_p-iu9C_s

Here is a link to race tech, check out the calculator.as well.

https://racetech.com/VehicleSearch

Below is a picture of the NewGen rear shock installed in my PreGen 250.If you look at the preload adjuster it's set on the highest (stiffest) setting. If you need it softer, adjust the preload by turning it down.

Once again what was the sag on the bike?
FYI he's talking about his CSC, not a Ninjette
__________________________________________________
My Ninja 300
tfkrocks is offline   Reply With Quote