Quote:
Originally Posted by gadgetguy1288
It wasn't that hard, just remove both seats remove the plastic and rear fenders, unhook the blinkers, tail and tag lights, then take out the 4 allen bolts holding the old fender on. After that its pretty simple to take the lights off of the old one and put em on the the new one then put everything back together. Just make sure your blinkers are hooked up right before you button everything backe up(ask me why lol) I can take mine apart again tomorrow and put it all back together if you need it.
|
It was pretty straight forward. I just brought this up because people have mentioned instructions for it, and the ones they give are not really worthwhile. The only thing that gave me any real trouble when I did mine was removing the turn signals from the original bracket, they were oddly tight. Other than being a little tedious at points it isn't bad at all.