Good write up. Some additional information should be added in the original post like needing a
27mm socket to remove the front sprocket, etc.
QUESTION:
I removed my OEM 14 tooth sprocket and will be replacing it with JTS 15 tooth sprocket a noticed it has a rubber washer on each side. Do I need remove these and place them on the new sprocket?
JTF515.15
PN: 80-985-15
EDIT:
Don't need the rubber and for sprocket (JTF515.15). I need to add shim (spacer)
http://www.ninjette.org/forums/showp...6&postcount=42
Thanks everyone.