ninjette.org - View Single Post

GeorgeRYoung · November 10th, 2013, 09:23 AM

Screw the adjustor and lock ring all the way in, then out a bit until the slots in the adjustor and the lock ring are facing forward. With the cable NOT routed through the adjustor, stick the end into the lever. Pull on the housing and sneak the cable into the adjustor via the slot.

No guarantee.

November 10th, 2013, 09:23 AM	#3
GeorgeRYoung ninjette.org member Name: George Location: Ottawa, Canada Join Date: Jun 2011 Motorcycle(s): EX250, C10 Concours Posts: 109	Another suggestion, works for me Screw the adjustor and lock ring all the way in, then out a bit until the slots in the adjustor and the lock ring are facing forward. With the cable NOT routed through the adjustor, stick the end into the lever. Pull on the housing and sneak the cable into the adjustor via the slot. No guarantee.