ninjette.org - View Single Post - Resto-mod for my 98 Ninja 250

thedrewski86 · October 18th, 2021, 07:45 AM

Correct me if I'm wrong, but adjusting a tq value due to an anti-seizing lubricant would defeat the purpose, no? If a bolt is spec'd to 10ft/lbs, the anti-seize just makes sure you are as close to that value as possible by preventing the bolt from seizing before you hit the required torque value. It makes your torquing more precise.

I guess you would have the option to adjust the torque value from 10ft/lbs to 10.0ft/lbs

October 18th, 2021, 07:45 AM	#33
thedrewski86 ninjette.org guru Name: Drew Location: SoCal Join Date: Jul 2013 Motorcycle(s): 2007 SV650S 2005 EX250F Posts: 487	Correct me if I'm wrong, but adjusting a tq value due to an anti-seizing lubricant would defeat the purpose, no? If a bolt is spec'd to 10ft/lbs, the anti-seize just makes sure you are as close to that value as possible by preventing the bolt from seizing before you hit the required torque value. It makes your torquing more precise. I guess you would have the option to adjust the torque value from 10ft/lbs to 10.0ft/lbs __________________________________________________ Don't think, look!