ninjette.org - View Single Post - Bike won’t start and it could be anything.

DannoXYZ · July 13th, 2020, 06:31 PM

If starter spins engine, it's working perfectly fine. Other areas to look at:

- power going to ignition coils?
- spark-plugs OK?
- ignition fuse OK?
- power going to ECU?
- power going to injectors?
- power going to petrol-pump?
- EFI fuse OK?
- how much petrol is in tank?
- has ignition-switch ever been replaced?
- MAP-sensor connected? vacuum hoses connected properly?
- crank-sensor connected? positioned-properly away from flywheel?
- TPS-sensor connected? Is it rotated properly? Idle-switch engaged?

Any one of these can cause no-start condition. It's very likely you may have more than one.

July 13th, 2020, 06:31 PM	#6
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	If starter spins engine, it's working perfectly fine. Other areas to look at: - power going to ignition coils? - spark-plugs OK? - ignition fuse OK? - power going to ECU? - power going to injectors? - power going to petrol-pump? - EFI fuse OK? - how much petrol is in tank? - has ignition-switch ever been replaced? - MAP-sensor connected? vacuum hoses connected properly? - crank-sensor connected? positioned-properly away from flywheel? - TPS-sensor connected? Is it rotated properly? Idle-switch engaged? Any one of these can cause no-start condition. It's very likely you may have more than one. Last futzed with by DannoXYZ; July 14th, 2020 at 11:51 AM.