ninjette.org - View Single Post

NinjaNoob23 · May 23rd, 2014, 04:05 PM

I took it all apart last night and found the problem. The bearing nut was a little loose but not enough to cause a problem. The leak in the fork seal has gotten a lot worse since the last time I checked it (less than a week?). Sooo now I get the pleasure of tearing the front forks apart to change the seals

Here is a good DIY write up on seal replacement.
https://www.ninjette.org/forums/showthread.php?t=23200

May 23rd, 2014, 04:05 PM	#6
NinjaNoob23 ninjette.org member Name: Nick Location: Jonesboro, Ar Join Date: May 2014 Motorcycle(s): 2011 Ninja 250 Posts: 17	I took it all apart last night and found the problem. The bearing nut was a little loose but not enough to cause a problem. The leak in the fork seal has gotten a lot worse since the last time I checked it (less than a week?). Sooo now I get the pleasure of tearing the front forks apart to change the seals Here is a good DIY write up on seal replacement. https://www.ninjette.org/forums/showthread.php?t=23200 Last futzed with by NinjaNoob23; May 23rd, 2014 at 06:02 PM.