ninjette.org - View Single Post - Refurbishing and upgrading my '05 fuel injection project...

DannoXYZ · April 9th, 2018, 06:59 AM

Please post progress! I’m using your previous threads as guidance for my 2003 pre-gen EFI project with Microsquirt. Gonna use a plenum to even out pulses and MAF sensor before throttle-body to get more accurate mass measurements.

Also stuffing 2007 EX500 into my other 2003 pre-gen frame for fun track toy. Going to try carbs first to get going quickly. Then Microsquirt it if packaging too tight for carbs.

April 9th, 2018, 06:59 AM	#5
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Please post progress! I’m using your previous threads as guidance for my 2003 pre-gen EFI project with Microsquirt. Gonna use a plenum to even out pulses and MAF sensor before throttle-body to get more accurate mass measurements. Also stuffing 2007 EX500 into my other 2003 pre-gen frame for fun track toy. Going to try carbs first to get going quickly. Then Microsquirt it if packaging too tight for carbs.