So after much time off, and finally bring the bike back from the corner of the garage, the weather seems to be improving to do some of the painting finally.
I built a small under seat pan, rudimentary just to hide the wiring between the seat and the sheet metal itself.
And finally started priming the the metal work for paint. Keep in mind it will all be done by me, as well as I can with spray can. Wet sanding every step and hoping to pull a gloss of what I have on hand. Again as my friend says "its for riding, so dont stress the paint"
Picked up some jetting stuff, 110 and 112 mains, and #40 pilots to help with the colder weather and now pod filter. Im going to need some help there, but will send that over to the jetting section