|
Carbs soaked in Pine-Sol water mix for 24 hrs, and then dry with air. Took air nozzle and blew through all of the opening and passages that I could find on the carburetors. Unfortunately this did not improve the problem of not being able to rev up past 5,000 RPM.
Did not want to try it with the choke on but if it did work then what does that mean?
Also when setting the mixture screws at 2 turns out caused back firing through the carburetor. Kind of scary when it is shooting flames out to the air box. I set it to about 1.5 turns and at least I could get it started. I am about at my wits end with this engine. Apparently it is blown or something is not right. The battery will not stay charged and the bike will not stay running. It will run for a while and then all of a sudden it will just die.
I have put over $600 into it and I am about ready to say f__ it and sell it. Hell, my little 150 cc scooter does not give me as much of problem as this.
Please help?
|