ninjette.org - View Single Post - Need riser blocks for 06 pre-gen Ninja 250

Ghostt · May 7th, 2022, 05:20 AM

Okay, are you looking for something like this?

https://www.buynowroaringtoyz.com/Ni...p/rtk725jb.htm

I wouldn't recommend you use these to lower the front of the bike, just use them to raise the handlebars.

With any of these style riser kits, be mindful of your control cables, and hoses.to make sure there is enough slack in them to still work properly, no binding, stressed, etc.... Kawasaki doesn't believe in waste. You may have to lower the front a little bit to get some slack in the lines.

May 7th, 2022, 05:20 AM	#4
Ghostt in your machine Name: Scott Location: Summer Shade, Ky. Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot. Blog Entries: 25 MOTM - Jun '17, May '16, Mar '15	Okay, are you looking for something like this? https://www.buynowroaringtoyz.com/Ni...p/rtk725jb.htm I wouldn't recommend you use these to lower the front of the bike, just use them to raise the handlebars. With any of these style riser kits, be mindful of your control cables, and hoses.to make sure there is enough slack in them to still work properly, no binding, stressed, etc.... Kawasaki doesn't believe in waste. You may have to lower the front a little bit to get some slack in the lines. __________________________________________________ *violente et ignorantia* ZX-2R BLOG *Twitter and Instagram = Ghostt_Scott* *I'm not here to change your mind, just to inform.* Last futzed with by Ghostt; May 7th, 2022 at 07:16 AM.