Quote:
Originally Posted by Hollywood314
I did replace the left control switch with OEM part. Unfortunately the old blinkers are toast.
|
Hi, no I mean plug in old left-hand control switches. Then see if they work properly to make new blinkers work.
Since you changed two things at once, it’s not possible to determine which change caused non-blinkiness. So... undo just one change to test. Easiest to unplug new control switches and plug in old one temporarily to test.
Heck, it’s possible there’s 3rd change in system. Crash very well may have damaged your flasher relay. After all, it is mechanical part. Put your ear on it when activating turn-signals. Does it click or make buzzing sound? Try tapping it with screwdriver to see if it wakes up. If it doesn’t click, then most likely it’s died, kaput!