View Single Post
Old October 5th, 2011, 04:17 PM   #21
slim08xxx
ninjette.org newbie
 
Name: Dima
Location: San Diego
Join Date: Sep 2011

Motorcycle(s): Ninja 250R

Posts: 7
I have a weird problem. I installed this kit and I have 2 regular signals in the front and the 2 rear signals are leds mounted to license plate.

1. If I switch the turn signal switch to right then front right signal turns on and stays solid not blinking and the rear right doesn't even turn on.

2. If I switch the signal switch to the left then left rear signal turns on and stays solid. the front left is off.

3. if I turn the switch to the right then on the dash nothing light up while if I switch to the left then the dash indicator light turns on and stays on not flashing.

What are the fixes?

thanks.

P.S.- Just got the Tridon flasher mentioned in other posts and plugged it in. with the new flasher and diode kit all the lights stopped working. with diode kit disconnected if I switch to the right then right front and left rear blink normally. If I switch to the left nothing turns on.

Last futzed with by slim08xxx; October 5th, 2011 at 05:49 PM. Reason: missed something
slim08xxx is offline   Reply With Quote