The green wire that I removed from the factory harness wont fully seat in your connector(almost like its too big), and I don't see any wires in the other side so I didn't worry about it as long as its not falling out(its wedged in there pretty good, and its not gonna fall out on its own at least. Am I missing the wire on the other side of that connector or did you you just stick the green wife in there to keep it out of the way? Also, IDK if its a change on the '11's or what but my green wire is actually two green wires both connected to the same connector.
__________________________________________________
Randy
USCG
Air Station Elizabeth City
|