ninjette.org - View Single Post - DIY: Installing No-Cut Diode kit from modmy250.com

Redsvt · February 23rd, 2012, 04:30 PM

After removing the connectors I come to find out that I have 2 green wires plug into the #9 connector, not one as the photo indicates. Now I connected everything and all works well, front and rear, horn works, dash lights all come on and the bike starts.

Quick question, does the headlight come on when you turn the key or does the engine need to be started before the head light comes on. With engine running low and high beam work , but the two green wires in the #9 hole bother me. Bike is a 2012.

February 23rd, 2012, 04:30 PM	#35
Redsvt ninjette.org member Name: Greg Location: Santa Ana Join Date: Jan 2012 Motorcycle(s): 2012 Ninja 250R Posts: 34	DIode install done...but After removing the connectors I come to find out that I have 2 green wires plug into the #9 connector, not one as the photo indicates. Now I connected everything and all works well, front and rear, horn works, dash lights all come on and the bike starts. Quick question, does the headlight come on when you turn the key or does the engine need to be started before the head light comes on. With engine running low and high beam work , but the two green wires in the #9 hole bother me. Bike is a 2012.