ninjette.org - View Single Post - any one interested in a FAQ for HID install?

saber63 · March 9th, 2010, 05:11 PM

Alrighty! soooo i got the kit installed awhile back, and ive gone on a few rides with it, so far no one has flashed there lights at me etc.... so YEAH!

the down side is that you need to mask the headlight housing to reduce some VERY blinding scatter, i used eltrical tape, you can also use car/sign vynal taht matchs your bike etc....

you will also need to be able to use wire stripers and a soildering iron, and have some spare wire on hand,

also suggested is a way to drill a hole for a screw or screw in a self tapping screw.

i will hopefully have a full write up with pictures and all that good stuff in the next 2-3 weeks! once finals are over

-Levi

March 9th, 2010, 05:11 PM	#12
saber63 ninjette.org member Name: F Location: seattle Wa Join Date: Dec 2009 Motorcycle(s): '90 250 project, '03 250r, '14 STR,12 STR, '01 R6 Posts: 84	Alrighty! soooo i got the kit installed awhile back, and ive gone on a few rides with it, so far no one has flashed there lights at me etc.... so YEAH! the down side is that you need to mask the headlight housing to reduce some VERY blinding scatter, i used eltrical tape, you can also use car/sign vynal taht matchs your bike etc.... you will also need to be able to use wire stripers and a soildering iron, and have some spare wire on hand, also suggested is a way to drill a hole for a screw or screw in a self tapping screw. i will hopefully have a full write up with pictures and all that good stuff in the next 2-3 weeks! once finals are over -Levi