July 5th, 2015, 10:05 PM
|
#11
|
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014
Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN"
Posts: A lot.
MOTM - Jun '17, May '16, Mar '15
|
They are ment to vent the tank, but in the case of an accident not allow gas to leak out, but more often cause problems then they fix.
Here are some pictures to help you.
The plastic piece houses the two small red diaphragm pieces, this one being mine, they are already gone, and you can leave the plastic piece out all together, as I'm going to do now.
Some things to watch out for are, there are 5 small springs under the round collar, and a small round collar as well on the locking mechanism, don't lose any of them.
Good luck.
__________________________________________________
violente et ignorantia
ZX-2R BLOG
Twitter and Instagram = Ghostt_Scott
I'm not here to change your mind, just to inform.
|
|
2 out of 2 members found this post helpful.
|