ninjette.org - View Single Post

mikedabike64 · February 21st, 2014, 05:17 PM

I adjusted my preload with half-inch spacers, soon as I get some time I want to drop my 500 springs into my 08 250.
I was wondering if anybody had experimented with this if anyone has taken ninja 500 Springs and put them into their ninja 250,
I put a caliper on both and they seemed very close in spring diameter.
I did not measure / compare the lengths.
So I thought let me just ask to see if somebody had done this previously thank you.
I thought given the same diameter with the 500 Spring being shorter it might be stiffer.
But again I thought let me ask before I go dropping them in.
Thanks Mike h

February 21st, 2014, 05:17 PM	#1
mikedabike64 ninjette.org guru Name: mike Location: jackson, nj Join Date: Jun 2009 Motorcycle(s): 2008 ninja 250 Posts: 271	Ninja 500 Spring swap I adjusted my preload with half-inch spacers, soon as I get some time I want to drop my 500 springs into my 08 250. I was wondering if anybody had experimented with this if anyone has taken ninja 500 Springs and put them into their ninja 250, I put a caliper on both and they seemed very close in spring diameter. I did not measure / compare the lengths. So I thought let me just ask to see if somebody had done this previously thank you. I thought given the same diameter with the 500 Spring being shorter it might be stiffer. But again I thought let me ask before I go dropping them in. Thanks Mike h