View Single Post
Old September 16th, 2009, 09:46 PM   #24
fastbyjb
ninjette.org newbie
 
Name: Justin
Location: Phoenix AZ
Join Date: Jul 2009

Motorcycle(s): K1200GT F800ST Ninja250R

Posts: 4
YEAR: 2009

INTAKE MODIFICATIONS: Airbox removed, individual K&N Pods

EXHAUST MODIFICATIONS: Yoshimura Full System

JET KIT OR STOCK? Stock

BRAND OF JET KIT? n/a

MAIN JET: Keihin 110

NEEDLE AND CLIP POSITION: 4 washers

MIXTURE SCREW SETTINGS: 3

ELEVATION 1000-5000

MISCELLANEOUS INFORMATION ABOUT YOUR BIKE'S JETTING SETUP: Initially set this up with two washers and 2.5 on the mixture screws, bike ran great at full throttle but 75-80mph driving on the freeway (at 1/2 throttle) showed lots of surge. Went to four washers, this cleaned it up a bit, turned out the mixture screws another .5 turn...Viola, happy all around
fastbyjb is offline   Reply With Quote