ninjette.org - View Single Post - DIY: Installing the Ecotrons EFI Kit on a Pregen

choneofakind · March 3rd, 2013, 08:34 PM

Right! That means I had more space to play with. Because of this, I didn't need to make it modular to fit with the air box and could do a much simpler install.

Unlike carbs which have to come out to be tuned, the TB's and fuel injection components never have to come out once their installed, even for valve adjustments.

I also wanted to get the fuel pump as far away from the engine as possible (on the battery box) to keep the pump temp in check. Keep an eye on that with your pump placement. Lolibater had to wrap his in exhaust wrap to keep it cool because he was having fuel cavitation issues.

I really like your MAP sensor holder. I will look into that later this season.

March 3rd, 2013, 08:34 PM	#8
choneofakind ninjette.org certified postwhore Name: . Location: . Join Date: Feb 2011 Motorcycle(s): . Posts: Too much. MOTM - Feb '13, Feb '14	Right! That means I had more space to play with. Because of this, I didn't need to make it modular to fit with the air box and could do a much simpler install. Unlike carbs which have to come out to be tuned, the TB's and fuel injection components never have to come out once their installed, even for valve adjustments. I also wanted to get the fuel pump as far away from the engine as possible (on the battery box) to keep the pump temp in check. Keep an eye on that with your pump placement. Lolibater had to wrap his in exhaust wrap to keep it cool because he was having fuel cavitation issues. I really like your MAP sensor holder. I will look into that later this season.