ninjette.org - View Single Post

NativeZombie · May 5th, 2020, 09:12 AM

I dissassembled my carbs over the winter for some maintenance, and now that I'm putting them back together with my new parts, I can't seem to remember the default position for the pilot jet screw inside the float bowl. I already have my idle/mixture screw backed put a hair over 2.5 turns and for the life of me, I cannot remember whether the pilot jet screw goes all the way in lightly sealed or a number of turns back out. Any advice or recommendations would be awesome! Thanks!!

May 5th, 2020, 09:12 AM	#1
NativeZombie ninjette.org newbie Name: Gabriel Location: Richmond Join Date: May 2020 Motorcycle(s): 2002 Kawasaki Ninja 250 Posts: 2	Pilot Jet Screw Help I dissassembled my carbs over the winter for some maintenance, and now that I'm putting them back together with my new parts, I can't seem to remember the default position for the pilot jet screw inside the float bowl. I already have my idle/mixture screw backed put a hair over 2.5 turns and for the life of me, I cannot remember whether the pilot jet screw goes all the way in lightly sealed or a number of turns back out. Any advice or recommendations would be awesome! Thanks!!