ninjette.org - View Single Post - 2008+ Ninja 250r FULL Wiring Diagram here!

jonthechron · November 26th, 2011, 08:10 PM

I would spilce them in with the BLUE/YELLOW positive wire going to the lowbeam

So Lets say the positive from the lowbeam (blue/yellow) to your switch and from your switch to the angeleye positive. The negative would go to the any ground wire (black/yellow), it should be as simple as it sounds.

This way not anyone can just flip the switch anytime and turn your angel eyes on because they would require the key to be in the on position before the switch is flipped.

November 26th, 2011, 08:10 PM	#20
jonthechron ninjette.org sage Name: Jon Location: Usa Join Date: Jan 2010 Motorcycle(s): magHitVE Posts: 649	I would spilce them in with the BLUE/YELLOW positive wire going to the lowbeam So Lets say the positive from the lowbeam (blue/yellow) to your switch and from your switch to the angeleye positive. The negative would go to the any ground wire (black/yellow), it should be as simple as it sounds. This way not anyone can just flip the switch anytime and turn your angel eyes on because they would require the key to be in the on position before the switch is flipped.