October 18th, 2013, 06:39 PM
|
#177
|
|
ninjette.org certified postwhore
Name: Justin
Location: Florida
Join Date: Aug 2012
Motorcycle(s): Ninja 250 2001
Posts: A lot.
|
Quote:
Originally Posted by n4mwd
Don't run it like that. You could run out of coolant and warp the heads. A new gasket wont fix that. Only a machine shop can. Sounds like its time to pull the heads and check for level. Then re-assemble with a new gasket.
Is this the engine you bought or the original engine you put back together?
|
Original
__________________________________________________
Mods: Offset clutch pressure plate
|
|
|