February 28th, 2018, 06:34 PM
|
#123
|
|
ninjette.org certified postwhore
Name: Bill
Location: Port Huron, Michigan
Join Date: Mar 2017
Motorcycle(s): 2007 Kawasaki 250 Ninja, 1982 Honda Ascot FT500
Posts: A lot.
|
Quote:
Originally Posted by DirtyPelican
So after much time off, and finally bring the bike back from the corner of the garage, the weather seems to be improving to do some of the painting finally.
I built a small under seat pan, rudimentary just to hide the wiring between the seat and the sheet metal itself.
And finally started priming the the metal work for paint. Keep in mind it will all be done by me, as well as I can with spray can. Wet sanding every step and hoping to pull a gloss of what I have on hand. Again as my friend says "its for riding, so dont stress the paint"
If you're going PODs think UNI.
Bill
Picked up some jetting stuff, 110 and 112 mains, and #40 pilots to help with the colder weather and now pod filter. Im going to need some help there, but will send that over to the jetting section |
__________________________________________________
Insanity: doing the same thing over and over again expecting different results each time.
|
|
|