ninjette.org - View Single Post - DIY - Replace the '08+ CDI (Ignitor) with the '88-94 CDI

gamma500 · August 23rd, 2009, 03:37 PM

'92 harness, 21119-1229 CDI both coming off eBay..The "Beav" is sending the male connector that will fit the female wiring harness connectors on my '08. Hopefully will get everything so things will be up and running by Friday.

I did go ahead and add 1 washer to the carb needles. Idiot that I am, I didn't think to synch them while I had everything off but the motor purrs pretty well as is.

August 23rd, 2009, 03:37 PM	#43
gamma500 ninjette.org member Name: Craig Location: Asheville, NC Join Date: Aug 2009 Motorcycle(s): 2008 Ninja 250R Posts: 98	'92 harness, 21119-1229 CDI both coming off eBay..The "Beav" is sending the male connector that will fit the female wiring harness connectors on my '08. Hopefully will get everything so things will be up and running by Friday. I did go ahead and add 1 washer to the carb needles. Idiot that I am, I didn't think to synch them while I had everything off but the motor purrs pretty well as is.