ninjette.org - View Single Post

ak_907_ak · April 1st, 2009, 11:49 PM

Ever since I did my Woodcraft Clip-On install, my throttle has been out of order.
Essentially, it will travel from one carb stop to the other, and back to idle, but it will also travel the other way.
So I can twist the grip downwards from idle, as normal, but i can also twist it upwards from idle, and quite some ways too.
I've taken the side cowl off and tried adjusting the nuts on the carb to move the cable up or down, but it didn't help, so I think i might have installed them wrong when I put everything back together.

April 1st, 2009, 11:49 PM	#1
ak_907_ak ninjette.org member Name: Nico Location: Anchorage, Alaska Join Date: Dec 2008 Motorcycle(s): 08 Ninja 250R Posts: 52	Need help with throttle cables. Ever since I did my Woodcraft Clip-On install, my throttle has been out of order. Essentially, it will travel from one carb stop to the other, and back to idle, but it will also travel the other way. So I can twist the grip downwards from idle, as normal, but i can also twist it upwards from idle, and quite some ways too. I've taken the side cowl off and tried adjusting the nuts on the carb to move the cable up or down, but it didn't help, so I think i might have installed them wrong when I put everything back together. __________________________________________________ '08 Ninja 250R: Yoshi Full System, HID's, FP Jet Kit, Snorkel removed, LED Brakelight, LED Footpeg Turnsignals, Zero Gravity SR Windscreen, Fender Eliminator, Solo Seat Cowl, Woodcraft Clip-Ons