|
I have the 2 bros slip ons. But in some previous threads, there is cut out kinda like bogging when I push it quickly get the throttle to the "wot" or the stop point. The other day I was at 3/4 open throttle, then I jerked the throttle to fully open. The bike hicupet. Felt like it cut out only lasted a sec or so. I have a few other threads stating this problem. I did shim with one washer both needles. The low end is much better, it only happens at top end. No pods, just slip ons.
Even on a slow roll to wot it does this. I would say about %75 of the time it Boggs or hicupet at wot. So I figured going up one jet might help.
|