I'm amidst of doing a valve adjustment and noticed that I have a slight leak at where the water pipe attaches to the valve head. Has anyone had this problem. I l looked at the parts fiche and it looks like there's an o-ring attached to it on the bottom. What I want to know is if this water pipe is press fit in and if I pull it out to replace the o-ring will it leak profusely? It's not leaking at all really and I have not noticed a drop in coolant level.
Side note, two bolts securing the engine bracket to frame rattled off some time ago, as well as two bolts securing my rear fender, one fairing bolt, and an exhaust header nuts. Also my clutch cable is frayed.
