Quote:
Originally Posted by FrugalNinja250
The only way they could keep water out of the tops of the forks would be if you submerged the bike. I think you're overblowing this in your mind quite a lot, IMHO. Like I said, you can set your forks like I described above and you'll be fine. I wouldn't recommend moving the tubes down flush with the tree as that will change your fork geometry.
|
I just don't want to f*** anything up by having them exposed but if there is a consensus that it isn't a huge deal, I won't worry too much. Anyone know the factory spec on how much the top of the forks are above the triple?
P.S. Thanks for bein so helpful thus far FrugalNinja