Roadracing World’s Sam Fleming and Melissa Berkoff visited the MV Agusta factory in Varese, Italy in April 2022. It is very rare to be able to video inside a modern […]
The post
Video: MV Agusta Factory Tour, Part Two appeared first on
Roadracing World Magazine | Motorcycle Riding, Racing & Tech News.
Roadracing World’s Sam Fleming and Melissa Berkoff visited the MV Agusta factory in Varese, Italy in April 2022.
It is very rare to be able to video inside a modern motorcycle factory so you can join Sam and Melissa in a detailed walk through the factory.
This is a multi-part series.
In Part 2 we see the engine assembly, the motorcycle assembly, the engine testing, and the motorcycle ABS testing.
Most of these videos are unscripted and had to be shot contemporaneously with the tour so forgive any verbal slips or the handheld nature of the camera work.
00:10 Assembly Lines – Engines and Bikes!
00:56 Crankshafts
01:24 Transmissions
02:37 Pistons and Connecting Rods
04:14 Testa (Valve Head Assembly)
04:45 Engine Assembly Line
06:15 Clutch Baskets
06:46 Completed Engines
07:26 Steering head bearings…with grease!
08:05 Start of Bike Assembly Line
11:25 Fluids Added to Completed Bike
13:00 Engine Testing
16:16 Bike testing
We hope you find this look inside the factory as fascinating as we did. Please let us know in the comments!
Sign up to our email list to be notified when more videos are released here:
http://list.13x.com/cgi-bin/mailman/l…
Subscribe to the print magazine at
http://roadracingworld.com
See an archive of other Army Of Darkness articles at
http://Armyofdarkness.com
@roadracingworld @mvagusta @vansonleathers
The post
Video: MV Agusta Factory Tour, Part Two appeared first on
Roadracing World Magazine | Motorcycle Riding, Racing & Tech News.