ninjette.org - View Single Post

Bob KellyIII · June 11th, 2023, 04:35 PM

This is totally weird......
with 3 shims (2 gordon put in at my request) and a tiny washer I had in my bolt assortment box the thing HAS NO FLATSPOT AT ALL !
it is very slow coming off idle though but I think that is air screw adjustment that I set at 2 turns out on each.....
....
mid range and top end are fantastic at the moment !
.... however it heated up extreamily quickly this time so I didn't press my luck and turned it off and I'll check the coolant again.... it must be very low !
....
NO flatspot with 3 shims ! that is weird
how and why can it be that far off with just a cleaning ? it boggles the mind !
.....
anyway I am encouraged.... it sounds really good I'll try again to adjust the air screws
and see if I can get the idle and off idle to be correct ...I got the flatspot out now and that was the hard one.... now lets see if I can get the idle right !
....
Bob.......

June 11th, 2023, 04:35 PM	#115
Bob KellyIII Retired motorcycle Mc. Name: Robert Location: Weed, California. Join Date: Jul 2021 Motorcycle(s): 2012 Kawasaki Ninja 250R, 2021 CSC TT250, 1977 Triumph Bonneville 750cc,2001 Honda XR650L. Posts: A lot.	This is totally weird...... with 3 shims (2 gordon put in at my request) and a tiny washer I had in my bolt assortment box the thing HAS NO FLATSPOT AT ALL ! it is very slow coming off idle though but I think that is air screw adjustment that I set at 2 turns out on each..... .... mid range and top end are fantastic at the moment ! .... however it heated up extreamily quickly this time so I didn't press my luck and turned it off and I'll check the coolant again.... it must be very low ! .... NO flatspot with 3 shims ! that is weird how and why can it be that far off with just a cleaning ? it boggles the mind ! ..... anyway I am encouraged.... it sounds really good I'll try again to adjust the air screws and see if I can get the idle and off idle to be correct ...I got the flatspot out now and that was the hard one.... now lets see if I can get the idle right ! .... Bob....... __________________________________________________ Its too late when you've gone too far !