ninjette.org - View Single Post

broken neck · March 24th, 2013, 07:47 AM

Well,

Finally, I've took the time to shim the needles (one washer par needle) and drilled the carburetors slides. I could only start the engine next to my friend's garage (still some snow over here and lots of little gravel on the streets and corners.

My bike is engine is completely stock with the stock exhaust. Will I be alright with those things done? Or messing with the needles and adding holes lead to other things to do?

And by the way, a huge thanks for all of you who took time to put up those DIY. Very handy and it helps a lot!

Thanks,

March 24th, 2013, 07:47 AM	#1063
broken neck ninjette.org guru Name: Thomas Location: Montréal Join Date: May 2012 Motorcycle(s): 2011 Ninja 250R Special Edition (sold), 2017 CRF250 Rally Posts: 384	Well, Finally, I've took the time to shim the needles (one washer par needle) and drilled the carburetors slides. I could only start the engine next to my friend's garage (still some snow over here and lots of little gravel on the streets and corners. My bike is engine is completely stock with the stock exhaust. Will I be alright with those things done? Or messing with the needles and adding holes lead to other things to do? And by the way, a huge thanks for all of you who took time to put up those DIY. Very handy and it helps a lot! Thanks,