ninjette.org - View Single Post

DannoXYZ · July 19th, 2020, 07:53 PM

Look closely at hole in frame with bright torche. Can you see through hole? Or is broken bolt stuck in there?

If there's enough sticking out, you can grab it with vice-grips and twist it out?

Then get any 6x1mm bolt to replace. I like to add large washer between bolt and bodywork to press firmly without cutting through bodywork.

July 19th, 2020, 07:53 PM	#2
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Look closely at hole in frame with bright torche. Can you see through hole? Or is broken bolt stuck in there? If there's enough sticking out, you can grab it with vice-grips and twist it out? Then get any 6x1mm bolt to replace. I like to add large washer between bolt and bodywork to press firmly without cutting through bodywork.