ninjette.org - View Single Post - Why you shouldn't leave your Swingarms Spools on

NathanUc · August 8th, 2013, 10:44 AM

I really think it must have been a lowered zx6r or have a very VERY poorly setup suspension.

I did some tests on mine and the 2013 zx6r spools didn't come close to hitting the exhaust. I know the 2013 is different, but I am fairly certain the exhaust/swing arms are identical.

Note: I have aftermarket (proper) exhaust, but I marked on the swing arm were the stock should sit. There was at least inches of clearance.

August 8th, 2013, 10:44 AM	#9
NathanUc B-Town Ninja Name: Nathan Location: Bloomington, IN Join Date: Feb 2011 Motorcycle(s): Black 2013 Ninja ZX6R ABS Posts: 609 Blog Entries: 3	I really think it must have been a lowered zx6r or have a very VERY poorly setup suspension. I did some tests on mine and the 2013 zx6r spools didn't come close to hitting the exhaust. I know the 2013 is different, but I am fairly certain the exhaust/swing arms are identical. Note: I have aftermarket (proper) exhaust, but I marked on the swing arm were the stock should sit. There was at least inches of clearance. __________________________________________________ Downgraded to a 2013 636. Previous owner of a 2010 250r --------------------------------- My moto-vlog YouTube channel http://www.youtube.com/bloomingtonninja