[phr3ek]

Originally Posted by almighty vexticles

Ok after looping the red dot pipe to the blue dot pipe (upper red circle) I kept vapor locking the bike (the tank would not vent properly). To remedy this I used one of the ports and this became the vent. I then re-used some of the hose from the evap. system and threw a cheapy Fram fuel filter at the end of a 6" section or so of the hose.


This will filter fresh air that is drawn into the tank (as this becomes your tank vent. The red dot port I simply threw a vacuum cap over as it is now worthless.

good ol' kawiforums