[omnivore]

Originally Posted by Mohawk

Finally found a side on pic, it's the same header routing as the 250, so won't fit a ZZR, due to the fairing bracket being where the headers want to be, unless you take a piece out or make the loop lower, or use a different setup.

See here, http://i1.wp.com/therideadvice.com/w...n.Still020.jpg

Will fit the next gen 250 too.

Must keep looking for an old Muzzy or just replace the cans on the stock system.

YMMV

All I care is that it clears the oilpan and swingarm.
we are using R6 fairings, and a custom tail on thebike.....so fairing bracketry is a non issue.