Quote:
Originally Posted by $wim
So after further investigating I found that one of my cylinders isn’t firing, oddly enough this problem happened after cleaning the carbs and now that I think about it I know I didn’t sync them. I’m thinking that’s not a coincidence because I have fuel leaking out of my right exhaust
|
Sounds like a carb issue on the fuel leaking part, but do you have spark on the dead cylinder - or no fuel?
Most likely the carbs need to come off and be gone through again, but you may be getting debris from the tank that is getting stuck under the float valve and dumping fuel. Maybe one is stuck open and the other is stuck closed or the jets are plugged.
Check the condition of the tank, screens on the petcock, and the small inline filter at the carb inlet.
Carb info -
https://faq.ninja250.org/wiki/Intake