YEAR: 2011
INTAKE MODIFICATIONS: air box removed.. uni pod filters
EXHAUST MODIFICATIONS: stock exhaust with modified stock can.
JET KIT OR STOCK? stock
BRAND OF JET KIT?
MAIN JET: keihn 110
NEEDLE AND CLIP POSITION: shimmed with 3 washers
MIXTURE SCREW SETTINGS: 3ish turns out
ELEVATION: sea level
MISCELLANEOUS INFORMATION ABOUT YOUR BIKE’S JETTING SETUP:
intially started with the mixture screw settings around 2.5 turns out when i put evrything back together.. throttle was hanging a little with 2.5 turns so ended up backing it out almost 3 - 3 1/4 turns and it seemed to like that.. idle right about 1300. those screws are a pita to get too without the MOS.. had to run to home depot to get one.. made the job much easier trying to adjust them