ninjette.org - View Single Post - Turned on key ignition switch and nothing happened!!

falonso0 · January 20th, 2021, 05:22 PM

Hi everyone!! I have a big problem with my Ninja 250r 2009 (carb no ecu).
When I turn on the key ignition switch nothing happen, all is deth. Battery it's ok 12,5v, all fuse ok and the 30A fuse too it's ok. All connectors and wiring are ok, nothing broken or touching ground. When I disconnect the indicators panel connector, I turn on the key and I have position light on the tail and turn ligths too, but only that. I suspect that the problem would be the CDI or CI (ignition controller), but I dont know how to test it. If the CDI won't work the ingnition key do nothing? Any ideas?? Thanks!!!!

January 20th, 2021, 05:22 PM	#1
falonso0 FDA Name: Fer Location: Argentina Join Date: Nov 2012 Motorcycle(s): Kawasaki Ninja 250R 2009 and Yamaha YZF R1 2009 Posts: 37	Turned on key ignition switch and nothing happened!! Hi everyone!! I have a big problem with my Ninja 250r 2009 (carb no ecu). When I turn on the key ignition switch nothing happen, all is deth. Battery it's ok 12,5v, all fuse ok and the 30A fuse too it's ok. All connectors and wiring are ok, nothing broken or touching ground. When I disconnect the indicators panel connector, I turn on the key and I have position light on the tail and turn ligths too, but only that. I suspect that the problem would be the CDI or CI (ignition controller), but I dont know how to test it. If the CDI won't work the ingnition key do nothing? Any ideas?? Thanks!!!! __________________________________________________ FDA