ninjette.org - View Single Post

DannoXYZ · September 6th, 2020, 06:38 PM

Measure voltage at following locations with key ON.
Leave all connectors connected, just back-probe them to get voltage.

1. Battery voltage = ???
1. WHITE wire going into ignition switch
2. BROWN wire going into ignition switch
3. BROWN/WHITE wire going to clocks

September 6th, 2020, 06:38 PM	#3
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Measure voltage at following locations with key ON. Leave all connectors connected, just back-probe them to get voltage. 1. Battery voltage = ??? 1. WHITE wire going into ignition switch 2. BROWN wire going into ignition switch 3. BROWN/WHITE wire going to clocks Last futzed with by DannoXYZ; September 7th, 2020 at 12:41 PM.