April 9th, 2015, 09:46 AM
|
#11
|
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014
Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN"
Posts: A lot.
MOTM - Jun '17, May '16, Mar '15
|
Quote:
Originally Posted by gantt
I set the mixture screws out 2 3/4 turns out but haven't messed with them anymore. as for float height, I haven't touched it. assuming it was ok from the factory.(and we all know what assuming can do).
|
Float height is the most and first critical step in setting up carburetors, also the most overlooked, if not set properly, the rest of the tuning will be out of wack. They should be set to 17mm Once that is done, then move on to bench sync, then dialing in the idle mixture screws.
http://faq.ninja250.org/wiki/How_do_..._the_floats%3F
__________________________________________________
violente et ignorantia
ZX-2R BLOG
Twitter and Instagram = Ghostt_Scott
I'm not here to change your mind, just to inform.
|
|
1 out of 1 members found this post helpful.
|